input 104 technical specifications the hbd series are dual output fully isolated converters featuring high efficiency topologies and ipds open frame packaging. the hbd family allows board designers complete freedom to deliver any combination of power off either output rail, up to each outputs maximum rating. the hbd family is available in 5v/3.3v or 3.3v/2.5v combinations, with both 24v and 48v inputs. the hbd family use planar magnetics, cool operating open frame packaging, have 1500vdc isolation, and over 1 million hours mtbf. ? independent dual outputs ? flexible load sharing ? high efficiency topology ? open frame design ? planar magnetics ? independent trims for each output ? 1500 vdc isolation ? 100 c baseplate operation turn-on time 10 ms remote shutdown 1 positive logic switching frequency 500 khz isolation input - output 1500 vdc input - case 1050 vdc output - case 500 vdc temperature coefficient 0.03 %/c case temperature operating range -40 to + 100c storage range -40 to + 125c thermal shutdown range 105 to 1 15c humidity max, non-condensing 95% vibration, 3 axes, 5 min each 5 g mtbf ? (bellcore tr-nwt-000332) 1.3 x 10 6 hrs safety ul, csa, en60950 weight (approx.) 2.4 oz. setpoint accuracy 1% line regulation v in min. - v in max., i out rated, output 1 0.2% vo line regulation v in min. - v in max., i out rated, output 2 1.0% vo load regulation i out min. - i out max., v in nom., output 1 0.5% vo load regulation i out min. - i out max., v in nom., output2 1.0% vo minimum output current 10% io dynamic regulation, loadstep 25% io pk deviation 4% vo settling time 500 u s voltage trim range (5v/3.3v units) 10% power limit threshold range, %io rated 110 - 140% ovp trip range (main ouput) 115 - 140%v out nom. voltage range 24 vdc nominal 18 - 36 vdc 48 vdc nominal 34 - 75 vdc reflected ripple 80 ma input reverse voltage protection shunt diode key features hbd series output general eff. vs load -24v 1 for negative logic, add suffix n to model number. ? mtbf predictions may vary slightly from model to model. specifications typically at 25 c, normal line, and full load - unless otherwise stated. specifications subject to change without notice. notes 888-ipd conv erter www.ipdconverters.com 4 7 3 2 6 6 8 dual 60 watt eff. vs load (48v in )
dual 60 watt * max input current an minimum input voltage, maximum rated output power ** current can be drawn from either output to its maximun value, or from both outputs to a combined total of 15a *** at nominal v in , rated output. specifications are subject to change without notice. for negative logic, add suffix n to model number models mechanical drawing 105 (millimeters) (millimeters) (millimeters) (millimeters) (millimeters) .x 0.5 .xx .25 .05 888-ipd conv erter www.ipdconverters.com 4 7 3 2 6 6 8 thermal impedance natural convection 6.6 c/w 100 lfm 5.7 c/w 200 lfm 4.2 c/w 300 lfm 3.1 c/w 400 lfm 2.6 c/w tolerances (unless otherwise speci- fied) inches inches inches inches inches .xx .020 .xxx .010 pin: pin: pin: pin: pin: .002 pin function 1-v in 2 case 3 on/off 4+v in 5+v out 2 6 - vout 2 7 trim 2 8 +vout 1 9-v out 1 10 trim 1 (4.6) .18 min ? .040 (1.02) 2.40 (61.0) 1.600 (40.64) .50 (12.7) (.64) .025 ref. 5 6 7 .400 (10.16) 8 9 10 2 1 3 4 (15.24) .600 (50.80) 2.000 mounting inserts m3x.5 through 4pl 1.400 (35.56) 1.900 (48.26) 2.28 (57.9) 1.000 (25.40) bottom view v in v in range i in max. * v out i out rated ripple & noise efficiency model (volts) (volts) (amps) (volts) (amps) pk-pk (mv) typ.** thermal impedance data is dependant on many environmental factors. the exact thermal performance should be validated for specific application. 24 24 24 48 48 48 18 - 36 18 - 36 18 - 36 34 - 75 34 - 75 34 - 75 2.89 4.54 4.54 2.27 1.62 2.27 +3.3/+2.5 +5.0/+3.3 +5.0/+3.3 +5.0/+3.3 +3.3/+2.5 +5.0/+3.3 12/15 12/15 8/12 8/12 12/15 12/15 75/75 100/75 100/75 100/75 75/75 100/75 80% 84% 80% 80% 80% 84% HBD040YED-A hbd060yge-a hbd040yge-a hbd040zge-a hbd040zed-a hbd060zge-a 75% 78% 80% 80% 75% 79%
|
